中文 | EN
SulfoCy5 SE
SulfoCy和LipoCy为北京富百科生物技术有限公司注册商标，未经授权严禁使用！
Water soluble Cyanine Cy5 NHS ester is for the labeling of various amine-containing molecules in aqueous phase without use of any organic co-solvent. This product is therefore particularly useful for the labeling of peptides, proteins and oligos etc which denature in the presence of organic co-solvents, as well as for proteins with low solubility. This dye is highly hydrophilic and water-soluble. A non-sulfonated analog is also available. It can be used as a replacement for Alexa Fluor 647, DyLight 649 for all applications.
|
CAS |
Molecular weight |
Excitation (nm) |
Emission (nm) |
Extinction coefficient (cm-1 M-1) |
Quantum yield |
|
146368-14-1 |
855.07 |
651 |
670 |
250000 |
0.27 , 0.4 |
Succinimidyl esters are proven to be the best reagents for amine modifications because the amide bonds that are formed are essentially identical to, and as stable as the natural peptide bonds. These reagents are generally stable and show good reactivity and selectivity with aliphatic amines. There are few factors that need be considered when SE compounds are used for conjugation reaction:
1). Solvents: Dissolve NHS ester in 1/10 reaction anhydrous volume of DMF or DMSO.
2). Reaction pH: The labeling reactions of amines with succinimidyl esters are strongly pH dependent. Amine-reactive reagents react with non-protonated aliphatic amine groups, including the terminal amines of proteins and the e-amino groups of lysines. Thus amine acylation reactions are usually carried out above pH 7.5. Protein modifications by succinimidyl esters can typically be done at pH 7.5-8.5, whereas isothiocyanates may require a pH 9.0-10.0 for optimal conjugations.
3). Reaction Buffers: Buffers that contain free amines such as Tris and glycine and thiol compounds must be avoided when using an amine-reactive reagent. Ammonium salts (such as ammonium sulfate and ammonium acetate) that are widely used for protein precipitation must also be removed (such as viadinlysis) before performing dye conjugations.
4). Reaction Temperature: Most conjugations are done at room temperature. However, either elevated or reduced temperature may be required for a particular labeling reaction.
5) Use 10:1 molar ratio Dye NHS/ protein to perform the labeling. Calculate required amount of NHS ester and the protein.
6) Add NHS ester solution to the solution of biomolecule, and vortex well. Keep on ice overnight, or at room temperature during at least 4 hours.
7) Purify the conjugation. The dye-protein conjugate purification by using a Sephadex G-25 column. Add PBS (pH 7.2-7.4) to the desired sample to complete the column purification. Combine the fractions that contain the desired dye-protein conjugate.
8) Determine the optimal dye/protein ratio (optional):Each protein requires distinct dye/protein ratio, which also depends on the properties of dyes. Over labeling of a protein could detrimentally affects its binding affinity while the protein conjugates of low dye/protein ratio gives reduced sensitivity.
Safety warnings and precautions
NOTE: The qualified persons should always wear lab coats, gloves and goggles when working with our products although they are low-risk chemicals for R&D only.
F/P计算：
Cy5 在650 nm 的摩尔吸光系数为250 000 M-1cm-1，所用蛋白在280 nm处的摩尔吸光系数为170 000 M-1cm-1；Cy5在280nm处的吸收是650nm处的5%。按以下公式计算F/P值。
[Cy5 dye] = (A650)/250 000
[peptide] =[A280-(0.05×A650)]/170 000
F/P final= [dye]/[peptide]= {0.68×A650}/ {A280- (0.05×A650)}
1) 本公司所有产品仅限于专业人员用于生命科学研究，不得用于临床诊断或治疗，不得用于食品或药品，不得存放于普通住宅。
2) 本公司所有产品必须由合格专业技术人员操作同时佩戴口罩/手套/实验服并遵守生物实验室安全操作规程！
Description
| Name | SulfoCy5 SE | ||
|---|---|---|---|
| CAT# | 1054-1 mg | CAS# | 1497420-70-8 & 146368-14-1 |
| Storage# | −20°C Sealed & desiccated & Minimized light exposure | Shelf Life# | 12months |
| Ex(nm)# | 646 | Em(nm)# | 664 |
| MW# | 791.99 | Solvent# | Water or DMSO |
The ultimate scientific research that strives for excellence is manifested in the details, forging the beauty of product quality.
Day after day, we persist in the pursuit of innovation. Through dedication, we experience and achieve a leading position in technology.
Room 208, 2nd Floor, Building 2, No. 4 Courtyard, Jinhang West Road, Shunyi District, Beijing
Customer Service hotline：400-686-3443
Email：info@fluorescence.cn