

SulfoCy5.5 SE（=Cy5.5 NHS=Cy5.5 SE）

Sulfo Cy5.5 SE=Cy5.5 NHS ester dyes has been wide used to label biological molecules for fluorescence imaging and other fluorescence-based biochemical analysis. Cy5.5 NHS ester is a reactive dye readily reacts with amino groups for the labeling of amino-groups in peptides, proteins, and oligonucleotides. It is a water soluble and hydrophilic dye for the far-red part of the spectrum. The dye has four sulfo groups which give it a negative charge at physiological pH values. The dye can be used for in vivo imaging and applications that demand low fluorescent background. Cy5.5 is a far-red (and near-infrared) emitting dye which is ideal for fluorescence measurements where background fluorescence is a concern. It is also suitable for in vivo NIR imaging experiments. Upon attachment to biomolecules (for example oligonucleotides), negligible shifts in excitation and emission wavelength have been observed.

零售价

0.0

元

市场价

0.0

元

浏览量:

1000

产品编号

1057-1mg/3095元

所属分类

Vivo-images dyes for small Animal

数量

库存:



产品描述

[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]

Sulfo-Cy5.5 NHS

Sulfo-Cy5.5 NHS ester dyes has been wide used to label biological molecules for fluorescence imaging and other fluorescence-based biochemical analysis. Cy5.5 NHS ester is a reactive dye readily reacts with amino groups for the labeling of amino-groups in peptides, proteins, and oligonucleotides. It is a water soluble and hydrophilic dye for the far-red part of the spectrum. The dye has four sulfo groups which give it a negative charge at physiological pH values. The dye can be used for in vivo imaging and applications that demand low fluorescent background. Cy5.5 is a far-red (and near-infrared) emitting dye which is ideal for fluorescence measurements where background fluorescence is a concern. It is also suitable for in vivo NIR imaging experiments. Upon attachment to biomolecules (for example oligonucleotides), negligible shifts in excitation and emission wavelength have been observed. In addition no effects on these spectral characteristics have been observed in the presence of 10% DMSO or under a range of pH conditions.

Molecular weight

Excitation (nm)

Emission (nm)

Extinction coefficient

(cm^-1 M^-1)

Quantum yield

Correction factor

(280 nm)

~1300

683

703

250000

0.27

0.101

* Measured in phosphate-buffered saline, Mujumdar, R. B., Ernst, L. A., Mujumd

NHS ester labeling of amino biomolecules

Super Fluor 488，555, 647, 680, 750

	488	555	647	680	750
molecular weight	～900	～1250	～1300	～1150	～1300
λmax(nm) Ex	494	555	647	680	750
Molar Absorption Coefficient(M-1cm-1)	71 000	150 000	239 000	184000	240 000
λmax(nm) Em	524	565	665	702	775
A280nm /Amax	11%	8%	3%	5％	4%

Succinimidyl esters are proven to be the best reagents for amine modifications because the amide bonds that are formed are essentially identical to, and as stable as the natural peptide bonds. These reagents are generally stable and show good reactivity and selectivity with aliphatic amines. There are few factors that need be considered when SE compounds are used for conjugation reaction:

1). Solvents: Dissolve NHS ester in 1/10 reaction anhydrous volume of DMF or DMSO.

2). Reaction pH: The labeling reactions of amines with succinimidyl esters are strongly pH dependent. Amine-reactive reagents react with non-protonated aliphatic amine groups, including the terminal amines of proteins and the e-amino groups of lysines. Thus amine acylation reactions are usually carried out above pH 7.5. Protein modifications by succinimidyl esters can typically be done at pH 7.5-8.5, whereas isothiocyanates may require a pH 9.0-10.0 for optimal conjugations.

3). Reaction Buffers: Buffers that contain free amines such as Tris and glycine and thiol compounds must be avoided when using an amine-reactive reagent. Ammonium salts (such as ammonium sulfate and ammonium acetate) that are widely used for protein precipitation must also be removed (such as viadinlysis) before performing dye conjugations.

4). Reaction Temperature: Most conjugations are done at room temperature. However, either elevated or reduced temperature may be required for a particular labeling reaction.

5) Use 10:1 molar ratio Dye NHS/ protein to perform the labeling. Calculate required amount of NHS ester and the protein.

6) Add NHS ester solution to the solution of biomolecule, and vortex well. Keep on ice overnight, or at room temperature during at least 4 hours.

7) Purify the conjugation. The dye-protein conjugate purification by using a Sephadex G-25 column. Add PBS (pH 7.2-7.4) to the desired sample to complete the column purification. Combine the fractions that contain the desired dye-protein conjugate.

8) Determine the optimal dye/protein ratio (optional):Each protein requires distinct dye/protein ratio, which also depends on the properties of dyes. Over labeling of a protein could detrimentally affects its binding affinity while the protein conjugates of low dye/protein ratio gives reduced sensitivity.

Safety warnings and precautions

NOTE: The qualified persons should always wear lab coats, gloves and goggles when working with our products although they are low-risk chemicals for R&D only.

特别提醒：

1) 本公司所有产品仅限于专业人员用于生命科学研究，不得用于临床诊断或治疗，不得用于食品或药品，不得存放于普通住宅!

2) 本公司所有产品必须由合格专业技术人员操作同时佩戴口罩/手套/实验服并遵守生物实验室安全操作规程！

Description

Name	SulfoCy5.5 SE
CAT#	1057-1mg	CAS#	N/A
Storage#	-20°C Sealed & desiccated & Minimized light exposure	Shelf Life#	24 months
Ex(nm)#	673	Em(nm)#	692
MW#	1128.42	Solvent#	Water or DMSO

扫二维码用手机看

上一个

SulfoCy7（=Cy7 ）

下一个

SulfoCy7 SE（=Cy7 NHS=Cy7 SE）

SulfoCy5.5 SE（=Cy5.5 NHS=Cy5.5 SE）

相关企业下载